బ్యాంక్స్ స్పెషల్

బ్యాంక్స్ స్పెషల్

 1.    Which of the following device can store large amount of data?
     a) Floppy Disk    b) Hard Disk
     c) CDROM     d) Zip Disk
     e) Pen drive
 2.    VIRUS stands for?
     a)    Very Important Resource Under Search
     b)    Virtual Information Resource Under Seize
     c)    Verify Interchange Result Until Source
     d)    Very Important Record User Searched
     e)    None of these
 3.    Which of the following is NOT a computer manufacture?
     a) SUN        b) IBM
     c) MICROSOFT
     d) APPLE    e) None of these
 4.    Which of the following program is not a utility?
     a) Debugger    b) Editor
     c) Spooler    d) All of the above
     e) None of these
 5.     The difference between memory and storage is that the memory is ____ and Storage is ____?
     a) temporary, permanent
     b) permanent, temporary
     c) slow, fast
     d) None of the above
     e) All of the above
 6.    Which type of switching system is telephone network?
     a) Circuit switching
     b) Packet switching
     c) Message switching
     d) All of the above
     e) None of the above
 7.    Operating system is a ____
     a)    collection of hardware components
     b)    collection of software routines
     c)    collection of input-output devices
     d)    All of the above
     e)    None of the above
 8.    All of the following are examples of real security and privacy risks EXCEPT:
     a) Hackers    b) Spam
     c) Viruses    d) Identity theft
     e) None of these
 9.    Which extension is used for Batch File?
     a) .sh    b) .exe    c) .bat
     d) .doc    e) .docx
 10.    Poor response times are usually caused by?
     a) Process busy
     b) High I/O rates
     c) High paging rates
     d) Any of the above
     e) None of these
 11.    Modem stands for:
     a) A type of secondary memory
     b) Modulator demodulator
     c)    Mainframe operating device memory
     d) All of the above
     e) None of the above
 12.    The errors that can be pointed out by the compiler are:
     a) Syntax errors
     b) Semantic errors
     c) Logical errors
     d) All of the above
     e) None of these
 13.    What are three types of basic languages used in computer programming?
     a)    Zero, low and high levels
     b)    COBOL, BASIC and PROLOG
     c)    FOTRAN, PL/I and SNOWBOL
     d)    Machine, Assembly and High level languages
     e) None of these
 14.    A computer can be defined as an electronic device that can ____
 (Choose the most precise definition)
     a)    carry out arithmetical operations
     b)    carry out logical function
     c)    accept and process data using a set of stored instructions
     d)    present information on a VDU
     e)    All of the above
 15.    A process known as ____ is used by large retailers to study trends?
     a) data mining    b) data selection
     c) POS        d) data conversion
     e) None of these
 16.    Computers gather data, which means that they allow users to _____ data?
     a) present    b) input
     c) output     d) storage
     e) None
 17.    Which of the following code is developed by IBM Corporation, is used in present days?
     a) ASCII    b) Hollerith Code
     c) Bardot code
     d) EBCDIC code
     e) None of these
 18.    Interrupts which are initiated by an instruction are?
     a) Internal    b) External
     c) Hardware    d) Software
     e) None of these
 19.    Which of the following does not represent on I/O device?
     a) Speaker which beeps
     b) Joystick     c) Plotter
     d) ALU     e) None
 20.    ____ is the science revolving around the use of nano- structures to build vices on an extremely small scale.
     a) Nanotechnology
     b) Micro-technology
     c) Computer forensics
     d) Artificial intelligence
     e) None of the above
 21.    The most common addressing techniques employed by a CPU is ____
     a) immediate    b) direct
     c) indirect    d) register
     e) All of the above
 22.    Swapping means?
     a)    Works best with many small partitions
     b)    Allows many programs to use memory simultaneously
     c)    Allows each program in turn to use the memory
     d)    Does not work with overlaying
     e)    None of these
 23.    Example of non-numerical data is:
     a) Employee address
     b) Examination score
     c) Bank balance
     d) All of the above
     e) None of the above
 24.    Which of the following companies is a leader in manufacture of Hard Disk Drives?
     a) Samsung    b) IBM
     c) Fujitsu    d) Seagate
     e) Moratala
 25.    A step by step procedure used to solve a problem is called
     a) Operating system
     b) Algorithm
     c) Application Program
     d) All of the above
     e) None of the above
 26.    Which of the following registers is used to keep track of address of the memory location where the next instruction is located?
     a) Memory Address Register
     b) Memory Data Register
     c) Instruction Register
     d) Program Register
     e) None of these
 27.    Which technology is used in a CDROM Drive?
     a) Mechanical
     b) Electromechanical
     c) Optical    d) Fiber Optical
     e) Cable
 28.    Which of the following comma-nds will take you directly to the root directory no matter what sub directory you are currently in?
     a) CD \root    b) CD\
     c) CD\..        d) CD..
     e) None of the above
 29.    The Analytical Engine developed during First Generation of computers used___ as a memory unit.
     a) RAM    b) Floppies
     c) Cards    d) Counter Wheels
     e) Rooms
 30.    A time sharing system implies__
     a)    more than one processor in the system
     b)    more than one program in memory
     c)    more than one memory in the system
     d)    All of the above
     e)    None of the above
 31.    What DOS program can you run to see which serial ports are detected?
     a) combing    b) MSD
     c) command.com
     d) SDET    e) serial.chk
 32.    The ___ command allows you to modify the default prompt to provide other information.
     a) prompt    b) windows
     c) cursor    d) click
     e) None of the above
 33.    What would be the next step in configuring the hard drive in a system after doing the low-level format?
     a) Format DOS partition
     b) Install operating system
     c)    Configure DMA channel and back up interrupt
     d) Partition hard disk
     e) None of the above
 34.    The ascending order or a data Hierarchy is?
     a)    bit - bytes - fields - record - file - database
     b)    bit - bytes - record - field - file - database
     c)    bytes - bit- field - record - file - database
     d)    bytes -bit - record - field - file - database
     e)    All of the above
 35.    The capacity of your hard drive is measured in?
     a) MHz        b) Mbps
     c) Giga bytes    d) Mega byte
     e) None of the above
 36.    The ALU and control unit of most of the microcomputers are combined and manufacture on a single silicon chip. What is it called?
     a) Mono chip    b) Microprocessor
     c) ALU     d) Control unit     e) None
 37.    Computers process data into information by working exclusively with?
     a) Multimedia
     b) Words    c) Characters
     d) Numbers    e) None
 
 KEY
     1. b    2. b    3. c    4. c    5. a
     6. a    7. b     8. b    9. c    10. d
     11. b    12.a     13. d    14. c    15. a
     16. b    17. d    18. b    19. d     20. a
     21. e    22. c    23. a    24. d    25. b
     26. d    27. c    28. b    29. d    30. b
     31. b    32. a    33. d    34. b    35. c
     36. b    37. d